|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN 12982
|
|
Kabul Tarihi :
|
19.01.2010
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Endüstriyel vanalar - Alın kaynaklı vanalar için uçtan uca ve merkezden uca boyutlar |
Başlık (İng) :
|
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
Kapsam :
|
|
Kapsam (İng) :
|
This European Standard specifies the end to end and centre to end dimensions for steel butt welding end valves with connecting dimensions of welding ends in compliance with EN 12627, used in PN and Class designated piping systems. The range of PN is: - PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400. The range of Class is: - Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500. The range of nominal size is: - DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900, DN 1 000; DN 1 200. NOTE 1 DN 750 is not applicable to PN designated valves. NOTE 2 See Annex B for the relationship between nominal size (DN) and nominal pipe size (NPS). NOTE 3 Valves having welding end profiles different from those specified in EN 12627, may use the same dimensions than those specified in Table 1. |
Yerini Aldığı :
|
TS EN 12982 :2002; |
Yararlanılan Kaynak :
|
EN 12982:2009 |
Uluslararası Karşılıklar :
|
EN 12982-EQV |
ICS Kodu :
|
23.060.01 Valfler-Genel |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
23 |
Fiyatı :
|
60,00 EURO (2.030,44 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|