|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS ISO 7-2
|
|
Kabul Tarihi :
|
2.04.2015
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Dişlerde basınç sızdırmazlık birleştirmeleri yapılan boru dişleri – Bölüm 2: Sınır mastarları aracılığıyla doğrulama |
Başlık (İng) :
|
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges |
Kapsam :
|
ISO 7'nin bu kısmı, konik iç ve dış dişlerin doğrulanması için limit göstergeleri kullanan bir işlemi belirtir
ve boru sistemi bileşenleri ve diğer ürünlerdeki paralel iç dişler, bunların boyutları ve toleransları
ISO 7-1'de ayrıntılı olarak verilmiştir.
Açıklanan ölçme sistemi, enjeksiyondaki dişlerin ölçülmesi için özel önlemler alınmadan uygun olmayabilir
kalıplanmış plastik iş parçaları.
ISO 7'nin bu kısmı, diş kalitesinin tam kontrolü için gerekli tüm gereklilikleri tamamen karşılamamaktadır ve
boyutları. Araç ve ekipmanın ek kontrolü ve üretim sırasında görsel kontrol yapılması gerekmektedir. |
Kapsam (İng) :
|
This part of ISO 7 specifies a process using limit gauges, for the validation of taper internal and external threads
and parallel internal threads on piping systems components and other products, the dimensions and tolerances of
which are detailed in ISO 7-1.
The gauging system described may not be suitable, without special precautions, for gauging of threads on injection
moulded plastic workpieces.
This part of ISO 7 does not cover completely all the requirements necessary for full control of thread quality and
dimensions. Additional control of tools and equipment and visual inspection during production are required to
ensure complete compliance with ISO 7-1, for example the length of useful thread on internally threaded
workpieces should be checked by direct measurement.
Annex A gives a summary of the gauges included in this part of ISO 7, together with details of the thread elements
controlled by each gauge and gauge identification numbers.
In the event of a dispute over compliance with the requirements of ISO 7-1, the gauges in this part of ISO 7 are to
be considered as decisive for the thread elements which they control on the workpiece. |
Yerini Aldığı :
|
TS 5485 :1988; |
Yararlanılan Kaynak :
|
ISO 7-2:2000 |
Uluslararası Karşılıklar :
|
ISO 7-2-EQV |
ICS Kodu :
|
21.040.30 Özel Vida Dişleri |
Cen/Cenelec :
|
ISO |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
40 |
Fiyatı :
|
80,00 EURO (2.773,58 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|