|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN 12799
|
|
Kabul Tarihi :
|
21.11.2000
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Sert lehim - Sert lehim bağlantılarının tahribatsız muayeneleri |
Başlık (İng) :
|
Brazing- Non- Destructive examination of brazed joints |
Kapsam :
|
This European Standard describes non-destructive examination procedures and test
piece types necessary to perform the tests on brazed joints.
The non-destructive examination methods described are as follows:
a) visual examination (see clause 4);
b) ultrasonic examination (see clause 5);
c) radiographic examination (see clause 6);
d) penetrant examination (see clause 7);
e) leak testing (see clause 8);
f) proof testing (see clause 9);
g) thermography (see clause 10).
The brazed joints to which these tests are applied can either be test samples
manufactured to obtain brazed joint design data, or manufactured as part of the
approval testing of a brazing procedure, or parts of a brazed assembly. The type of
test piece described for each test can be quoted or incorporated in engineering
application standards that deal with brazed assemblies.
This European Standard does not recommend the number of samples to be tested or
the repeat tests allowed. Neither does it specify methods of sampling brazed joints,
except to give guidance regarding the precautions necessary, nor does it comment on
the acceptance criteria applicable to any of the tests. No attempt is made to define
which test or tests, if any , should be applied in any situation. This is a matter to be
established before any particular method of test is selected.
The methods of non-destructive examination are not associated with any particular
type of brazed assembly but lay down the general principles of the types of testing
described. It is emphasised that a satisfactory examination method can only be
developed and used after taking into account all the relevant factors regarding the |
Kapsam (İng) :
|
. |
Tadil Eden :
|
TS EN 12799/A1 :2006; |
Yararlanılan Kaynak :
|
EN 12799:2000 |
Uluslararası Karşılıklar :
|
EN 12799:2000-- |
ICS Kodu :
|
25.160.50 Kaynak ve Lehimleme |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
37 |
Fiyatı :
|
80,00 EURO (2.796,97 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|