|
Standard Detayı
|
İptal Standard TÜRK STANDARDI
|
TS No :
|
TS EN 14399-8
|
|
Kabul Tarihi :
|
13.04.2010
|
İptal Tarihi :
|
19.11.2018 |
Hazırlık Grubu :
|
Makina İhtisas Grubu |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
Başlık :
|
Ön yüklemeli yüksek dayanımlı yapısal cıvatalama takımları - Bölüm 8: Hv sistemi - Altıköşe alıştırma cıvata ve somun takımları |
Başlık (İng) :
|
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblie |
Kapsam :
|
Bu standard; EN 14399 serisi Avrupa Standardlarına ait olup, vida dişi ölçüsü M12 ila M36 ve mukavemet sınıfı 10.9 olan ve EN 14399-2’ye göre uygunluk deneyine tabi tutulan ön yüklemeli bağlantılara uygun HV sistemi yüksek dayanımlı yapısal alıştırma cıvata ve somun takımları için aşağıdaki hususları EN 14399-1 ile birlikte değerlendirilmek üzere tasarımlanmıştır:
- Genel kurallar,
- Uygunluk değerlendirmesi için deney,
- Uygunluk değerlendirilmesi,
- Düzenleyici işaretleme.
Bu standard vida dişi ölçüleri M12 ila M36 ve cıvata mukavemet sınıfı 10.9 olan takımlar için aşağıdaki hususlarla ilgili kuralları kapsar:
- Boyutlar,
- EN 14399-6’ya göre ilgili rondela/rondelalar,
- Performans ve uygunluk deneyleri. |
Kapsam (İng) :
|
This part of this European standard specifes, together with prEN 14399-1, the requirements for assemblies of high-strength structural fit bolts and nuts of system HV suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 10.9/10. Assemblies of fit bolts with shaft diameter (d+ 1mm) and nuts to this part of this European Standard have been designed to allow preloading of at least 0, 7 fub x As according to EN 1993-1-8 (Eurocode 3) and to obtain ductility predominantly by deformation of the engaged thread. For this purpose the components have the following characteristics: - nut height approximately 0, 8 d - fit bolt with short thread length Fit bolt and nut assemblies to this part of this European standard include washers according to prEN 14399-6. |
Yerini Aldığı :
|
TS 12434 :1998; TS ISO 7411 :1998; TS EN 14399-8 :2009; |
Yerine Geçen :
|
TS EN 14399-8 :2018; |
Yararlanılan Kaynak :
|
EN 14399-8:2007 |
Uluslararası Karşılıklar :
|
EN 14399-8-EQV; DIN EN 14399-8-EQV; BS EN 14399-8-EQV; NF E25-801-8-EQV |
Tercüme Edildiği STD :
|
EN 14399-8 |
ICS Kodu :
|
21.060.01 Bağlama Elemanları (Genel) |
Atıf Yapılan STD :
|
TS EN 1993-1-8 :2005; TS EN 10045-1 :1999; TS EN 14399-1 :2010; TS EN 14399-2 :2010; TS EN 14399-5+AC :2010; TS EN 14399-6 :2010; TS 3611 EN 20898-2 :1998; TS EN 26157-1 :2007; TS 3576 EN ISO 898-1 :2006; TS EN ISO 3269 :2007; TS 3699 EN ISO 4759-1 :2004; TS EN ISO 6157-2 :2007; TS EN ISO 10684 :2007; : (ISO 148-1);; : (ISO 261);; : (ISO 965-2);; : (ISO 965-5);; |
Cen/Cenelec :
|
CEN |
Dili :
|
tr |
Renk Durumu :
|
|
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
Sayfa Sayısı :
|
16 |
Fiyatı :
|
250,00 TL + %10 Kdv |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|