|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN 1487
|
|
Kabul Tarihi :
|
9.12.2016
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Bina vanaları - Hidrolik güvenlik grupları - Deneyler ve özellikler |
Başlık (İng) :
|
Building valves- Hydraulic safety groups- Tests and requirements |
Kapsam :
|
Bu Avrupa Standardı, hidrolik güvenlik grupları için, DN 15 - DN 25 arası nominal büyüklüklerde, çalışma basınçları1 olan) 0,1 MPa (1 bar) - 0,7 MPa (1 bar) arasında değişen boyutları, malzemeleri ve performans gereksinimlerini (test yöntemleri dahil) belirtir. 7 bar). Hidrolik güvenlik grupları, maksimum 95 ° C depolama sıcaklığına sahip olan depolama suyu ısıtıcılarının içme suyuna takılmak üzere tasarlanmıştır.
Hidrolik güvenlik grupları, sıcak su ısıtıcılarındaki basıncı sınırlandırır, suyun ana devreye girmesini önler ve tahliye edilen suyun, su ısıtıcıdaki suyla temas etmesini önler.
Hidrolik güvenlik grupları sıcaklığı kontrol etmez. Şofbenin mekanik direnci en azından anma basıncına eşit kalırsa, su ısıtıcılarının hidrolik güvenliğini sağlarlar. |
Kapsam (İng) :
|
This European Standard specifies dimensions, materials and performance requirements (including methods of test) for hydraulic safety groups, of nominal sizes from DN 15 to DN 25, having working pressures1) from 0,1 MPa (1 bar) to 0,7 MPa (7 bar). Hydraulic safety groups are intended for fitting to the potable water supply of storage water heaters, having a maximum storage temperature of 95°C.
Hydraulic safety groups limit the pressure in hot water heaters, prevent the backflow of water into the main circuit and prevent the discharged water to get into contact with the water in the water heater.
Hydraulic safety groups do not control the temperature. They ensure the hydraulic safety of water heaters if the mechanical resistance of the water heater remains at least equal to the rating pressure.
NOTE The use of the device specified in this European Standard does not override the need to use controls (e.g. thermostats and cut-outs) which act directly on the power sources of water heaters. |
Yerini Aldığı :
|
TS EN 1487 :2000; |
Yararlanılan Kaynak :
|
EN 1487:2014 |
Uluslararası Karşılıklar :
|
EN 1487-EQV |
ICS Kodu :
|
91.140.60 Su Tedarik Sistemleri |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
37 |
Fiyatı :
|
80,00 EURO (2.773,58 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|