|
|
|
Standard Detayı
|
TÜRK STANDARDI
(Direktif :2014/35/EU)
|
|
TS No :
|
TS EN 60332-1-2
|
|
|
Kabul Tarihi :
|
27.12.2005
|
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Yangın riski altındaki elektrik ve optik fiber kablo deneyleri - Bölüm 1-2: Yalıtkan tek tel ve fiber kablo için dikey alev yayılım deneyi - 1 kw'lık ön karışımlı alev için prosedür |
|
Başlık (İng) :
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
|
Kapsam :
|
|
|
Kapsam (İng) :
|
Specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. The apparatus is given in EN 60332-1-1. NOTE 1 Testing to EN 60332-1-2 may be performed simultaneously with that to EN 60332-1-3 if required. Recommended requirements for performance are given in Annex A. EN 60332-1-2 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm² total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed. In these cases, the procedure given in EN 60332-2-2 is recommended. NOTE 2 Since the use of insulated conductor or cable which retards flame propagation and complies with the recommended requirements of this standard is not sufficient by itself to prevent propagation of fire under all conditions of installation, it is recommended that wherever the risk of propagation is high, for example in long vertical runs of bunches of cables, special installation precautions should also be taken. It cannot be assumed that because the sample of cable complies with the performance requirements recommended in this standard, that a bunch of cables will behave in a similar manner. (See EN 60332-3 series.) Has the status of a group safety publication in accordance with IEC Guide 104. |
|
Yerini Aldığı :
|
TS EN 50265-2-1 :2000; |
|
Tadil Eden :
|
TS EN 60332-1-2/A1 :2016; TS EN 60332-1-2/A11 :2017; TS EN 60332-1-2/A12 :2021; |
|
Yararlanılan Kaynak :
|
EN 60332-1-2:2004 |
|
Uluslararası Karşılıklar :
|
EN 60332-1-2-EQV; IEC 60332-1-2-EQV |
|
ICS Kodu :
|
13.220.40 Malzeme ve Ürünlerin Tutuşma ve Yanabilirliği; 33.180.10 Fiberler ve Kablolar; 29.060.20 Kablolar |
|
Cen/Cenelec :
|
CEN/CENELEC |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
35 |
|
Fiyatı :
|
76,00 EURO (2.657,12 TL + %10 Kdv) |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|