|
|
|
Standard Detayı
|
TÜRK STANDARDI
|
|
TS No :
|
TS EN IEC 60695-2-12
|
|
|
Kabul Tarihi :
|
2.12.2021
|
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Yangın tehlikesi deneyi –
Bölüm 2-12: Akkor/sıcak telin esaslı alındığı deney yöntemleri –
Malzemeler için akkor tel ile alevlenebilirlik indisi (GWFI) deney yöntemi |
|
Başlık (İng) :
|
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials |
|
Kapsam :
|
|
|
Kapsam (İng) :
|
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index (GWFI). GWFI is the highest temperature, determined during this standardized procedure, at which the tested material does not ignite or, if it does, extinguishes within 30 s after removal of the glow-wire and is not totally consumed; and molten drips, if they occur, do not ignite the wrapping tissue. This test method is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire ignition temperature (GWIT) test method for materials, IEC 60695-2-13, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. NOTE As an outcome of conducting a fire hazard assessment, an appropriate series of preselection flammability and ignition tests can allow a reduction of end product testing. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. |
|
Yerini Aldığı :
|
TS EN 60695-2-12 :2012; TS EN 60695-2-12 :2012; TS EN 60695-2-12/A1 :2014; TS EN 60695-2-12/A1 :2014; |
|
Yararlanılan Kaynak :
|
EN IEC 60695-2-12:2021 |
|
Uluslararası Karşılıklar :
|
EN IEC 60695-2-12-EQV; IEC 60695-2-12-EQV |
|
ICS Kodu :
|
13.220.40 Malzeme ve Ürünlerin Tutuşma ve Yanabilirliği; 29.020 Elektrik Mühendisliği (Genel) |
|
Cen/Cenelec :
|
CENELEC/IEC |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
23 |
|
Fiyatı :
|
60,00 EURO (2.097,73 TL + %10 Kdv) |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|