|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN 60730-2-6
|
|
Tercüme Tarihi :
|
6.05.2022
|
Kabul Tarihi :
|
24.03.2016
|
Hazırlık Grubu :
|
TK-03: Elektrik Teknik Komitesi |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Otomatik elektrikli kumandalar - Bölüm 2-6: Otomatik, elektrikli, basınç algılama kumandaları için mekanik gereklilikleri kapsayan özel gereklilikler |
Başlık (İng) :
|
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
(IEC 60730-2-6:2015) |
Kapsam :
|
IEC 60730'un bu bölümü, donanımın içinde, üzerinde veya donanımla birlikte kullanım amaçlı asgari gösterge basıncı değeri –60 kPa ve azami gösterge basıncı değeri 4,2 MPa olan otomatik elektrikli basınç algılama kumandaları için geçerlidir. Donanım elektrik, gaz, yağ, katı yakıt, güneş enerjisi, vb. veya bunların birleşimini kullanabilir. |
Kapsam (İng) :
|
IEC 60730-2-6:2015(E) applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. Automatic electrical pressure sensing controls for equipment used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This standard applies to inherent safety, operating values, operating sequences where such are associated with equipment protection, and to the testing of automatic electrical pressure sensing controls used in, on or in association with equipment. This standard is also applicable to the functional safety of low complexity safety related pressure sensing controls and systems. This standard is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - aligns the text with IEC 60730-1, Edition 5; - modifies requirements for Class B control function (H.27.1.2.2); - modifies requirements for Class C control function (H.27.1.2.3) and - modifies requirements for faults during lock-out or safety- shut-down. |
Yerini Aldığı :
|
TS EN 60730-2-6 :2010; TS EN 60730-2-6 :2010; |
Tadil Eden :
|
TS EN 60730-2-6/A1 :2020; |
Yararlanılan Kaynak :
|
EN 60730-2-6:2016 |
Uluslararası Karşılıklar :
|
EN 60730-2-6-EQV |
Tercüme Edildiği STD :
|
EN 60730-2-6 |
ICS Kodu :
|
97.120 Evlerde Kullanılan Otomatik Kontroller |
Cen/Cenelec :
|
CENELEC/IEC |
Dili :
|
tr |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
40 |
Fiyatı :
|
280,00 TL + %10 Kdv |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|