|
Standard Detayı
|
İptal Standard TÜRK STANDARDI
|
TS No :
|
TS EN 1992-3
|
|
Kabul Tarihi :
|
21.12.2006
|
İptal Tarihi :
|
4.03.2024 |
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
Başlık :
|
Eurocode 2: Beton yapıların tasarımı - Bölüm 3: Sıvı tutma ve muhafaza yapıları |
Başlık (İng) :
|
Eurocode 2: Design of concrete structures - Part 3: Part 3: Liquid
retaining and containment structures |
Kapsam :
|
|
Kapsam (İng) :
|
Replacement of clause 1.1.2 in EN 1992-1-1 by:
1.1.2 Scope of Part 3 of Eurocode 2
(101)P Part 3 of EN 1992 covers additional rules to those in Part 1 for the design of structures constructed
from plain or lightly reinforced concrete, reinforced concrete or prestressed concrete for the containment of
liquids or granular solids.
(102)P Principles and Application Rules are given in this Part for the design of those elements of structure
which directly support the stored liquids or materials (i.e. the directly loaded walls of tanks, reservoirs or silos).
Other elements which support these primary elements (for example, the tower structure which supports the
tank in a water tower) should be designed according to the provisions of Part 1-1.
(103)P This part does not cover:
¾ Structures for the storage of materials at very low or very high temperatures
¾ Structures for the storage of hazardous materials the leakage of which could constitute a major health or
safety risk.
¾ The selection and design of liners or coatings and the consequences of the choice of these on the design
of the structure.
¾ Pressurised vessels.
¾ Floating structures
¾ Large dams
¾ Gas tightness
(104) This code is valid for stored materials which are permanently at a temperature between –40 °C and
+200 °C.
(105) For the selection and design of liners or coatings, reference should be made to appropriate
documents.
(106) It is recognised that, while this code is specifically concerned with structures for the containment of
liquids and granular materials, the clauses covering design for liquid tightness may also be relevant to other
types of structure where liquid tightness is required.
(107) In clauses relating to leakage and durability, this code mainly covers aqueous liquids. Where other
liquids are stored in direct contact with structural concrete, reference should be made to specialist literature. |
Yerini Aldığı :
|
TS ENV 1992-4 :2005; |
Yerine Geçen :
|
TS EN 1992-1-1 :2024; |
Yararlanılan Kaynak :
|
EN 1992-3:2006 |
Uluslararası Karşılıklar :
|
EN 1992-3-EQV |
ICS Kodu :
|
91.080.40 Beton Yapılar; 91.010.30 Teknik Hususlar |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
Sayfa Sayısı :
|
25 |
Fiyatı :
|
64,00 EURO (2.218,86 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|