|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN 16722
|
|
Kabul Tarihi :
|
9.12.2016
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Endüstriyel vanalar - Sonu dişli olan uç uca ve merkezi uca vanalar için boyutlar |
Başlık (İng) :
|
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
Kapsam :
|
- |
Kapsam (İng) :
|
This European Standard specifies the end-to-end and centre-to-end dimensions for valves with threaded ends with connecting dimensions in compliance with EN ISO 228-1 or EN 10226-1, used in PN and Class designated piping systems.
The range of PN is:
— PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400.
The range of Class is:
— Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500.
The range of nominal size is:
— DN 4; DN 6; DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100.
NOTE 1 See Annex C for the relationship between nominal size (DN) and nominal pipe size (NPS).
NOTE 2 Valves having screwed end profiles different from those specified in EN ISO 228-1 or EN 10226–1, may use the same dimensions than those specified in Table 1. |
Yararlanılan Kaynak :
|
EN 16722:2015 |
Uluslararası Karşılıklar :
|
EN 16722-- |
ICS Kodu :
|
23.060.01 Valfler-Genel |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
21 |
Fiyatı :
|
60,00 EURO (2.080,18 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|