|
|
|
Standard Detayı
|
TÜRK STANDARDI
|
|
TS No :
|
TS EN ISO 898-5
|
|
|
Kabul Tarihi :
|
12.06.2013
|
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Bağlama elemanlarının mekanik özellikleri - Karbon çeliği ve alaşımlı çelikten imal edilmiş - Bölüm 5: Çekme gerilmelerine maruz kalmayan tespit vidaları ve benzer diş açılmış bağlama elemanları |
|
Başlık (İng) :
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses |
|
Kapsam :
|
|
|
Kapsam (İng) :
|
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range. Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only. ISO 898-5:2012 is applicable to set screws and similar fasteners: made of carbon steel or alloy steel, having a triangular ISO metric screw thread according to ISO 68-1, with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2, with diameter/pitch combinations according to ISO 261 and ISO 262, and having thread tolerances according to ISO 965-1 and ISO 965-2. |
|
Yerini Aldığı :
|
TS EN ISO 898-5 :2007; |
|
Yararlanılan Kaynak :
|
EN ISO 898-5:2012 |
|
Uluslararası Karşılıklar :
|
ISO 898-5-EQV; EN ISO 898-5-EQV |
|
ICS Kodu :
|
21.060.10 Civatalar,Vidalar,Saplamalar |
|
Cen/Cenelec :
|
CEN |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
25 |
|
Fiyatı :
|
64,00 EURO (2.433,22 TL + %10 Kdv) |
|
Çakışan Standart Varsa İptal Tarihi (DOW) |
- |
|