|
|
|
Standard Detayı
|
TÜRK STANDARDI
|
|
TS No :
|
TS EN ISO 15877-3
|
|
|
Kabul Tarihi :
|
19.01.2010
|
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Plastik boru sistemleri-Sıcak ve soğuk su sistemleri için-Klorlanmış poli(vinilklorür)pvc-C) - Bölüm 3: Ekleme parçaları |
|
Başlık (İng) :
|
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings |
|
Kapsam :
|
|
|
Kapsam (İng) :
|
This part of ISO 15877 specifies the characteristics of fittings made from chlorinated poly(vinyl chloride) (PVCC)
for piping systems intended to be used for hot and cold water installations within buildings for the
conveyance of water, whether or not intended for human consumption (domestic systems) and for heating
systems under design pressures and temperatures according to the class of application (see Table 1 of
ISO 15877-1:2009).
This part of ISO 15877 covers a range of service conditions (application classes) and design pressure classes.
For values of TD, Tmax and Tmal in excess of those in Table 1 of ISO 15877-1:2009, this part of ISO 15877
does not apply.
NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects,
taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the parameters for the test methods referred to in this part of ISO 15877.
In conjunction with the other parts of ISO 15877, it is applicable to PVC-C fittings, their joints and joints with
components of PVC-C, other plastics and non-plastics materials intended to be used for hot and cold water
installations.
This part of ISO 15877 is applicable to fittings of the following types:
? fittings for solvent cement joints;
? mechanical fittings;
? fittings with incorporated inserts.
NOTE 2 Fittings made from PVC-C are manufactured by injection-moulding. |
|
Yerini Aldığı :
|
TS 12182-3 EN ISO 15877-3 :2006; |
|
Tadil Eden :
|
TS EN ISO 15877-3:2009/A1 :2011; TS EN ISO 15877-3/A2 :2021; |
|
Yararlanılan Kaynak :
|
EN ISO 15877-3:2009 |
|
Uluslararası Karşılıklar :
|
EN ISO 15877-3-EQV; ISO 15877-3-EQV |
|
ICS Kodu :
|
23.040.45 Plastik Fitingler; 91.140.60 Su Tedarik Sistemleri |
|
Cen/Cenelec :
|
CEN/ISO |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
38 |
|
Fiyatı :
|
80,00 EURO (2.773,58 TL + %10 Kdv) |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|