|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS EN ISO 15610
|
|
Kabul Tarihi :
|
24.04.2023
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Metalik malzemeler için kaynak prosedürlerinin vasıflandırılması ve şartnamesi - Deneye tabi tutulmuş kaynak sarf malzemelerini esas alan vasıflandırma |
Başlık (İng) :
|
Specification and qualification of welding procedures for metallic materials – Qualification based on tested welding consumables |
Kapsam :
|
|
Kapsam (İng) :
|
This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service. This document is limited to: — parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2); — fillet welds with throat thickness a ≥ 1 mm. This document is not applicable when any of the following is specified for the welded joint: a) hardness; b) impact properties; c) preheating; d) controlled heat input; e) interpass temperature; f) post-weld heat treatment. The use of this document can also be restricted by an application standard, specification or other documents. |
Yerini Aldığı :
|
TS EN ISO 15610 :2005; |
Yararlanılan Kaynak :
|
EN ISO 15610:2023 |
Uluslararası Karşılıklar :
|
EN ISO 15610-EQV; ISO 15610-EQV |
ICS Kodu :
|
25.160.10 Kaynak Prosesleri ve Kaynakçı Vasıfları |
Cen/Cenelec :
|
CEN/ISO |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
20 |
Fiyatı :
|
56,00 EURO (1.941,50 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|