|
|
|
Standard Detayı
|
İptal Standard
TÜRK STANDARDI
|
|
TS No :
|
TS ISO 11119-3
|
|
|
Kabul Tarihi :
|
31.07.2017
|
|
İptal Tarihi :
|
15.02.2021 |
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
|
Başlık :
|
Gaz tüpleri - Tekrar doldurulabilir kompozit yapılı - Tasarım, imalat ve deneyler - Bölüm 3: 450 litreye kadar olan tamamen sarılmış elyaf takviyeli ve yük paylaşımsız metal veya metal olmayan gömlekli kompozit gaz tüpleri ve kapları |
|
Başlık (İng) :
|
Gas cylinders -- Refillable composite gas cylinders and tubes -- Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
|
Kapsam :
|
|
|
Kapsam (İng) :
|
This part of ISO 11119 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
The cylinders and tubes in this part of ISO 11119 are
a)
Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and
b)
Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.
The cylinders are constructed:
1)
in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement;
2)
in the form of two filament wound shells joined together.
Cylinders and tubes manufactured and tested to this part of ISO 11119 are not intended to contain toxic, oxidizing or corrosive gases.
This part of ISO 11119 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.
Cylinders and tubes manufactured and tested to this part of ISO 11119 have a minimum design life of 15 years.
This part of ISO 11119 does not address the design, fitting and performance of removable protective sleeves.
NOTE 1 References to cylinders in this International Standard include composite tubes if appropriate.
NOTE 2 ISO 11439 applies to cylinders intended for use as fuel containers on natural gas vehicles and ISO 11623 covers periodic inspection and re-testing of composite cylinders. |
|
Yerine Geçen :
|
TS ISO 11119-3 :2021; |
|
Yararlanılan Kaynak :
|
ISO 11119-3:2013 |
|
Uluslararası Karşılıklar :
|
ISO 11119-3-EQV |
|
ICS Kodu :
|
23.020.30 Basınçlı Kaplar, Gaz Silindirleri |
|
Cen/Cenelec :
|
CEN/ISO |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
|
Sayfa Sayısı :
|
51 |
|
Fiyatı :
|
94,00 EURO (3.258,95 TL + %10 Kdv) |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|