|
|
|
Standard Detayı
|
TÜRK STANDARDI
(Direktif :2014/34/EU)
|
|
TS No :
|
TS EN ISO/IEC 80079-38
|
|
|
Kabul Tarihi :
|
20.03.2017
|
|
Hazırlık Grubu :
|
Teknik Kurul |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Patlayıcı ortamlar - Bölüm 38: Yer altı maden ocaklarında potansiyel patlayıcı ortamlarda kullanılan donanımlar ve bileşenler |
|
Başlık (İng) :
|
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines |
|
Kapsam :
|
- |
|
Kapsam (İng) :
|
This part of ISO/IEC 80079 specifies the explosion protection requirements for the design,
construction, assessment and information for use (maintenance, repair, marking) of
equipment that may be an individual item or form an assembly.
This includes machinery and components for use in mines susceptible to explosive
atmospheres of firedamp and/or combustible dust. The standard atmospheric conditions
(relating to the explosion characteristics of the atmosphere) under which it may be assumed
that equipment can be operated are:
• temperature -20 °C to +60 °C;
• pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and
• air with normal oxygen content, typically 21 % v/v.
This part of ISO/IEC 80079 applies for equipment and components according to EPL Mb to be
used in explosive atmospheres containing firedamp and/or combustible dust.
NOTE 1 In some countries, there might be differences according to the classification, e.g. Mb is similar to
category M2 in the European Union.
For equipment and components according to EPL Ma, the requirements of this standard and
of ISO 80079-36 and IEC 60079-0 apply.
NOTE 2 A standard with additional requirements for EPL Ma is under preparation.
It is necessary to take account of external conditions to the equipment which may affect the
hazard and the resultant protection measures. These measures may include ventilation, gas
detection or gas drainage.
This part of ISO/IEC 80079 also deals with the prevention of ignitions of explosive
atmospheres caused by burning (or smouldering) of combustible material such as fabric
fibres, plastic ”O”-rings, rubber seals, lubricating oils or greases used in the construction of
the equipment if such items could be an ignition source. For example, the mechanical failure
of rotating shaft bearings can result in frictional heating that ignites its plastic cage, plastic
seal or lubricating grease.
Detailed requirements and test procedures for the fire protection of conveyer belts are not
part of this part of ISO/IEC 80079. |
|
Yerini Aldığı :
|
TS EN 1710+A1 :2008; TS EN 1710+A1 :2009; TS EN 1710+A1/AC:2010 :2011; TS EN 1710+A1/AC :2012; |
|
Tadil Eden :
|
TS EN ISO/IEC 80079-38/A1 :2018; |
|
Yararlanılan Kaynak :
|
EN ISO/IEC 80079-38:2016 |
|
Uluslararası Karşılıklar :
|
EN ISO/IEC 80079-38-EQV; EN ISO/IEC 80079-38-EQV; EN ISO/IEC 80079-38-EQV |
|
ICS Kodu :
|
29.260.20 Patlayıcı Atmosferlerde Çalışan Elektrik Cihazları |
|
Atıf Yapılan STD :
|
:; :; :; :; :; :; :; TS EN ISO 340 :2013; :; TS ISO 1940-1 :2016; TS EN ISO 7010:2012 :2013; TS EN ISO 13849-1 :2016; :; TS EN ISO 14935 :2003; TS EN ISO 15029-1 :2002; :; TS EN ISO 80079-36 :2016; TS EN ISO 80079-37:2016 :2016; |
|
Cen/Cenelec :
|
CEN/ISO/IEC |
|
Dili :
|
en |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
69 |
|
Fiyatı :
|
100,00 EURO (3.654,62 TL + %10 Kdv) |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|