|
|
|
Standard Detayı
|
|
Geri
|<
<<
>>
>|
|
TÜRK STANDARDI
(Direktif :2006/42/EC)
|
|
TS No :
|
TS EN 1870-14+A2
|
|
|
Kabul Tarihi :
|
9.10.2013
|
|
Hazırlık Grubu :
|
TK20: Makine Güvenliği Teknik Komitesi |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
|
Başlık :
|
Ağaç işleme makinalarında güvenlik -
Dairesel testere makinaları -
Bölüm 14: Düşey panel testere makinaları |
|
Başlık (İng) :
|
Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
|
Kapsam :
|
Bu standard, yüklemenin ve boşaltmanın elle yapıldığı, aşağıdaki unsurların takılı olduğu düşey panel testere makinalarıyla ilgili olan Madde 4’te listelenen bütün önemli tehlikeleri, tehlikeli durumları ve olayları kapsar:
- Çentik açma düzeneği,
- Köşe kesme tertibatı,
- Orta destek tertibatı,
- Paralel düşey kesmeler için programlanabilir durdurma,
- Freze takımları kullanarak bir pasoda en fazla 20 mm genişliğinde oluk açma tertibatı. |
|
Kapsam (İng) :
|
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with: the facility for scoring; an angle cutting device; a middle support device; a programmable stop for parallel vertical cuts; the facility for grooving with a width of at most 20 mm in one pass by using a milling tools, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer. The machines are designed for cutting panels of the following materials: a) wood based materials such as chipboard, fibreboard, plywood and also these materials where they are covered with plastic / light alloy laminates; b) solid wood; c) hardened rubber and hardened plastic material; d) non ferrous materials e. g. light alloy; e) compound materials with core consisting of polyurethane or mineral material laminated with light alloy. This document does not apply to vertical panel saws with pressure beam and saw unit mounted behind the workpiece support. This document does not deal with hazards relating to the combination of a single machine being used with any other machine (as part of a line). This document is not applicable to vertical panel saws which are manufactured before the date of its publication as EN. NOTE Machines covered by this standard are listed under A. of annex IV of the Machinery Directive. |
|
Yerini Aldığı :
|
TS EN 1870-14+A1 :2010; |
|
Yararlanılan Kaynak :
|
EN 1870-14:2007+A2:2012 |
|
Uluslararası Karşılıklar :
|
NF E64-607-14, NF EN 1870-14+A1-EQV; DIN EN 1870-14+A1-EQV; EN 1870-14+A2-EQV |
|
ICS Kodu :
|
79.120.10 Ağaç İşleme Makinaları |
|
Atıf Yapılan STD :
|
TS EN 847-1+A1 :2009; TS EN 894-1 :1998; TS EN 894-2 :1998; TS EN 894-3+A1 :2010; TS EN 1005-1+A1 :2010; TS EN 1005-2+A1 :2010; TS EN 1005-3+A1 :2010; TS EN 1005-4+A1 :2010; TS EN 1037+A1 :2009; TS EN 1088+A2 :2010; TS EN 50178 :2003; TS EN 50370-1 :2005; TS EN 50370-2 :2004; TS EN 60204-1 :2011; TS 3367 EN 60439-1 :2004; TS 3033 EN 60529 :1997; TS EN 61310-1 :2008; TS EN 61496-1 :2007; TS EN 61800-5-2 :2008; TS EN ISO 3743-1 :2011; TS EN ISO 3743-2 :2010; TS EN ISO 3744 :2011; TS EN ISO 3745 :2012; TS EN ISO 3746 :2011; TS EN ISO 4414 :2011; TS EN ISO 4871 :2010; TS EN ISO 9614-1 :2010; TS EN ISO 11202 :2010; TS EN ISO 11204 :2010; TS EN ISO 11688-1 :2011; TS EN ISO 12100 :2011; TS EN ISO 13849-1 :2008; TS EN ISO 13849-2 :2013; TS EN ISO 13850 :2009; TS EN ISO 13857 :2009; TS ISO 7960 :2003; |
|
Cen/Cenelec :
|
CEN |
|
Dili :
|
tr, en, fr, de |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükte |
|
Sayfa Sayısı :
|
56 |
|
Fiyatı :
|
310,00 TL + %10 Kdv |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|