|
Standard Detayı
|
Geri
|<
<<
>>
>|
|
TÜRK STANDARDI (Direktif :97/23/EC)
|
TS No :
|
TS EN 14394+A1
|
|
Kabul Tarihi :
|
18.02.2015
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Isıtma kazanları-Brulörlü ısıtma kazanlarıanma ısı çıkışı 10 mw'yi aşmayan ve en yüksek çalışma sıcaklığı 110°c olan |
Başlık (İng) :
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
Kapsam :
|
akıtlı, otomatik cebri çekişli brülörler için EN 676’ya ve atomize yakıt brülörleri için EN 267’ye bakılmalıdır) ayrı olarak pazara sunulan, cebri çekiş brülörleri ile donatılan, çelik ve dökme demirden imal edilen, standard kazanlar ve düşük sıcaklıktaki kazanların (kazan gövdesi terimi yerine “kazan” terimi kullanılmıştır) tasarımı, imalatı, emniyetli işletilmesi ve uygun enerji kullanımı için özellikleri ve deney metotlarını kapsar. Kazanlar, kazan imalâtçısının talimatlarına uygun olarak, yanma odasında, negatif basınçlı (tabii çekişli kazan) veya pozitif basınçlı (basınçlı kazan) olarak işletilir |
Kapsam (İng) :
|
This Standard specifies the requirements and test methods for the construction, the safety and the rational energy usage for heating boilers (standard-heating and low temperature boilers) fired by liquid fuels from steel and cast iron with burners according to the relevant burner standards up to a nominal heat output of 10 MW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer's instructions Boilers in accordance with this European Standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is up to 110 °C and the maximum safety temperature limiter of 120 °C. The maximum allowable operating pressure is 10 bar. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of COUNCIL DIRECTIVE 92/42/EEC of 21 May 1992 on efficiency requirements for new hot-water boilers fired with liquid or gaseous fuels. The relationship with the EC-Directive is described in the informative Annex ZA in this European Standard. |
Yararlanılan Kaynak :
|
EN 14394:2005+A1:2008 |
Uluslararası Karşılıklar :
|
EN 14394:2005+A1-EQV |
Tercüme Edildiği STD :
|
EN 14394:2005+A1 |
ICS Kodu :
|
91.140.10 Merkezi Isıtma Sistemleri |
Cen/Cenelec :
|
CEN |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
131 |
Fiyatı :
|
131,00 EURO (4.433,12 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|