|
|
|
Standard Detayı
|
İptal Standard
TÜRK STANDARDI
(Direktif :2006/42/EC)
|
|
TS No :
|
TS EN 13736+A1
|
|
|
Kabul Tarihi :
|
9.10.2013
|
|
İptal Tarihi :
|
19.03.2018 |
|
Hazırlık Grubu :
|
TK20: Makine Güvenliği Teknik Komitesi |
|
Doküman Tipi :
|
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
|
Başlık :
|
Takım tezgâhlarında güvenlik - Pnömatik presler |
|
Başlık (İng) :
|
Safety of machine tools - Pneumatic presses |
|
Kapsam :
|
Bu standard, Madde 3.1.13’te tanımlanan ve bundan sonra makinalar olarak atıfta bulunulan soğuk metal ve kısmen metal olan malzeme ile çalışma amaçlı pnömatik preslerin imalât ve tedarikinden, EN 292-1:1991 Madde 3.11’de tanımlandığı gibi tasarımından sorumlu olan kişiler tarafından uygulanacak teknik güvenlik kurallarını ve koruyucu tedbirleri belirler.
Bu standard, yarattığı tehlikeler ve riskler ayrı olarak çalışan makinaların yarattığı tehlikelerle ve risklerle mukayese edilebilen otomatik üretim hattına entegre edilmiş makinalara da uygulanır. |
|
Kapsam (İng) :
|
This European Standard specifies technical safety requirements and protective measures to be adopted by persons undertaking the design as defined in 3.11 of EN 292-1:1991, manufacture and supply of pneumatic presses the intended use of which is the cold working of metal or material partly of metal as defined in 3.3 and hereafter referred as machines. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately. This standard also covers pneumatic presses: whose primary intended use is the cold working of metal, which are to be used in the same way to work other sheet materials (e. g. cardboard, plastic, rubber, leather) and metal powder; with an intermediate pneumatic/hydraulic intensifier. The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. This standard presumes access to the press from all directions, deals with the hazards described in clause 4, and specifies the safety measures for both the operator and other exposed persons. This standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately. This standard does not cover machines whose principal designed purpose is: a) sheet metal cutting by guillotine; b) bending or folding by pneumatic press brakes or folding machines; c) spot welding; d) tube bending; e) straightening; f) drop stamping; g) working by pneumatic hammer; h) compaction of metal powder. Special pneumatic machines for assemblying or calibrating are not covered but this standard may be used as a basis for there machines. This standard does not cover the safety requirements related to the use of PES or PPS. They will be dealt with at its next revision. This standard is not applicable to machines which are manufactured before the date of publication of this document by CEN. |
|
Yerini Aldığı :
|
TS EN 13736 :2007; |
|
Yerine Geçen :
|
TS EN ISO 16092-1 :2018; TS EN ISO 16092-4 :2020; |
|
Yararlanılan Kaynak :
|
EN 13736:2003+A1:2009 |
|
Uluslararası Karşılıklar :
|
EN 13736+A1-EQV; DIN EN 13736-EQV; NF E63-023-EQV |
|
Tercüme Edildiği STD :
|
EN 13736+A1 |
|
ICS Kodu :
|
25.120.10 Dövme Ekipmanları, Makaslar |
|
Atıf Yapılan STD :
|
TS EN 292-1 :1996; TS EN 292-2 :1996; : (EN 292-2/A1:1995);; TS EN 294 :1995; TS EN 349 :1995; TS EN 418 :1995; TS 11901 EN 574 :2002; TS EN 614-1+A1 :2010; TS EN 894-2+A1 :2010; TS EN 894-3+A1 :2010; TS EN 953+A1 :2011; TS EN 954-1 :1999; TS EN 982 :2005; TS EN 983 :2000; TS EN 999 :2001; TS EN 1005-2+A1 :2010; TS EN 1037 :1997; TS EN 1050 :1997; TS EN ISO 12100 :2011; TS EN 1088 :2005; TS EN 1127-1 :1999; TS EN 1837+A1 :2010; TS EN ISO 3746 :2011; TS EN ISO 4871 :2010; TS EN ISO 11202 :2010; TS EN ISO 11688-1 :2011; TS EN 60204-1 :2011; TS 3033 EN 60529 :1997; TS EN 61310-2 :2008; TS EN 61496-1 :2007; : (prEN 61496-2: 1997);; |
|
Cen/Cenelec :
|
CEN |
|
Dili :
|
tr, en, fr, de |
|
Renk Durumu :
|
Siyah-Beyaz |
|
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
|
Sayfa Sayısı :
|
49 |
|
Fiyatı :
|
310,00 TL + %10 Kdv |
| Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|