|
Standard Detayı
|
TÜRK STANDARDI
|
TS No :
|
TS ISO 22915-1
|
|
Kabul Tarihi :
|
15.02.2021
|
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
U (Yürürlükteki Standard/Standard) |
Başlık :
|
Endüstriyel taşıtlar - Kararlılığın doğrulanması - Bölüm 1: Genel |
Başlık (İng) :
|
Industrial trucks - Verification of stability - Part 1: General |
Kapsam :
|
|
Kapsam (İng) :
|
ISO 22915-1:2016 series deals with the safety of industrial trucks, as defined in ISO 5053-1, relative to their stability and the verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled, or pedestrian-propelled vehicles excepting those running on rails. They are either operator-controlled or driverless, and are designed to carry, tow, push, lift, stack or tier in racks.
ISO 22915-1:2016 specifies basic test criteria and requirements for verifying the stability of industrial trucks, hereafter referred to as trucks.
It applies to the following truck types and special conditions:
a) counterbalanced trucks with mast as specified in ISO 22915-2;
b) reach and straddle trucks as specified in ISO 22915-3;
c) pallet stackers, double stackers, and order-picking trucks with operator position elevating up to and including 1 200 mm lift height as specified in ISO 22915-4;
d) single-side-loading trucks as specified in ISO 22915-5;
e) bidirectional and multidirectional trucks as specified in ISO 22915-7;
f) additional stability test for trucks operating in special conditions of stacking with the mast tilted forward as specified in ISO 22915-8;
g) counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-9;
h) additional stability test for trucks operating in special conditions with the load substantially laterally displaced by powered devices as specified in ISO 22915-10;
i) industrial variable-reach trucks as specified in ISO 22915-11;
j) industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer as specified in ISO 22915-12;
k) rough-terrain variable-reach trucks as specified in ISO 22915-14;
l) counterbalanced trucks with articulated steering as specified in ISO 22915-15;
m) pedestrian-propelled trucks as specified in ISO 22915-16;
n) additional stability test for trucks operating in the special condition of offset load, offset determined by utilization as specified in ISO 22915-20;
o) order-picking trucks with operator position elevating above 1 200 mm as specified in ISO 22915-21.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments.
ISO 22915-1:2016 does not apply to the following:
- trucks handling suspended loads which may swing freely;
- low-lift trucks with lift height up to and including 500 mm. |
Yerini Aldığı :
|
TS ISO 22915-1 :2014; TS ISO 22915-1 :2014; |
Yararlanılan Kaynak :
|
ISO 22915-1:2016 |
Uluslararası Karşılıklar :
|
ISO 22915-1-EQV |
ICS Kodu :
|
53.060 Endüstriyel Kamyonlar |
Cen/Cenelec :
|
ISO |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükte |
Sayfa Sayısı :
|
19 |
Fiyatı :
|
56,00 EURO (1.941,50 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|