|
Standard Detayı
|
İptal Standard TÜRK STANDARDI (Direktif :2006/42/EC,97/23/EC)
|
TS No :
|
TS EN 267+A1
|
|
Tercüme Tarihi :
|
24.02.2015
|
Kabul Tarihi :
|
31.01.2012
|
İptal Tarihi :
|
9.11.2020 |
Hazırlık Grubu :
|
TK21: Tesisat, Isıtma, Soğutma ve Havalandırma Teknik Komitesi |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
Başlık :
|
Brülörler - Sıvı yakıtlar için - Otomatik cebri çekişli |
Başlık (İng) :
|
Automatic forced draught burners for liquid fuels |
Kapsam :
|
Bu standard; otomatik cebri çekişli sıvı yakıt brülörlerinin terminolojisi, yapısı, çalışması ve aynı zamanda kumanda ve emniyet tertibatları için genel gerekleri ve bu brülörler için deney işlemlerini kapsar.
Bu standard, aşağıdaki yakıtları kullanan otomatik cebri çekişli sıvı yakıt brülörlerine uygulanır:
? 20 °C’ta, brülör girişinde 1,6 mm2 /s (cSt)’den 6 mm2/s (cSt)’ye kadar olan aralıktaki bir viskoziteye sahip yakıt ve
? Uygun atomize etme için ön ısıtma gerektiren daha yüksek kaynama noktalı, petrol esaslı ilk arıtımlı yakıtlar (viskozitesi 6 mm2/s’den daha büyük).
- |
Kapsam (İng) :
|
This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This European Standard applies to automatic forced draught oil burners supplied with: a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 °C; and higher boiling petroleum based first raffinates (viscosity greater than 6 mm 2 /s), that require preheating for proper atomisation. This European Standard is applicable to: single burners fitted to a single combustion chamber; single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account; single-fuel and dual-fuel burners when operating on oil only; the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function. This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J. This European Standard also deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K. This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance. This European Standard does not deal with hazards due to specific applications. This European Standard is not applicable to automatic forced draught oil burners which are manufactured before the date of its publication as European Standard. |
Yerini Aldığı :
|
TS EN 267 :2011; |
Yerine Geçen :
|
TS EN 267 :2020; TS EN 267 :2020; |
Yararlanılan Kaynak :
|
EN 267:2009+A1:2011 |
Uluslararası Karşılıklar :
|
EN 267:2009+A1-EQV |
Tercüme Edildiği STD :
|
EN 267:2009+A1 |
ICS Kodu :
|
27.060.10 Sıvı ve Katı Yakıt Brulörleri |
Atıf Yapılan STD :
|
TS EN 2309 :2002; TS EN 287-1 :2007; TS EN 676+A2 :2009; TS EN 953 :1998; TS EN 1044 :2003; TS EN 1057 :2007; TS EN 1088+A2 :2010; TS EN 1092-1 :2010; TS EN 1092-2 :2010; TS EN 1092-3 :2010; TS EN 1254-1 :2000; TS EN 1254-4 :2002; TS EN 1854 :2008; TS EN 10204 :2007; TS EN 10220 :2003; TS EN 10305-1 :2012; TS EN 10305-2 :2012; TS EN 10305-3 :2012; TS EN 10305-4 :2013; TS EN 10305-5 :2012; TS EN 10305-6 :2012; TS EN 13611 :2008; TS EN 15035 :2007; TS EN 15036-1 :2007; TS EN 50156-1 :2005; TS EN 60335-2-102 :2007; TS 3033 EN 60529 :1997; TS 7425 EN 60730-1 :2004; TS EN 61310-1 :2008; TS EN ISO 228-1 :2004; TS 6814 EN ISO 1127 :1999; TS EN ISO 4871 :2002; TS EN ISO 6806 :2010; TS EN ISO 9606-2 :2007; TS 6868-3 EN ISO 9606-3 :2004; TS 6868-4 EN ISO 9606-4 :2004; TS 6868-5 EN ISO 9606-5 :2004; TS EN ISO 11688-1 :2001; TS EN ISO 12100-1 :2004; TS EN ISO 12100-2 :2004; TS EN ISO 13849-1 :2008; TS EN ISO 13857 :2014; TS EN ISO 15609-1 :2007; TS EN ISO 15609-2 :2002; TS EN ISO 15609-3 :2005; TS EN ISO 15609-4 :2005; TS EN ISO 15609-5 :2012; TS EN ISO 15612 :2005; TS EN ISO 15614-7 :2008; TS EN ISO 15614-11 :2002; TS EN ISO 23553-1 :2011; TS ISO 1129 :2002; TS ISO 3183 :2012; TS ISO 8217 :2014; |
Cen/Cenelec :
|
CEN |
Dili :
|
tr |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
Sayfa Sayısı :
|
86 |
Fiyatı :
|
440,00 TL + %10 Kdv |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|