|
Standard Detayı
|
İptal Standard TÜRK STANDARDI
|
TS No :
|
TS ISO 16092-2
|
|
Kabul Tarihi :
|
19.03.2020
|
İptal Tarihi :
|
9.11.2020 |
Hazırlık Grubu :
|
Teknik Kurul |
Doküman Tipi :
|
|
Yürürlük Durumu :
|
H (İptal Edilmiş Standard/Withdrawn standard) |
Başlık :
|
Makine aletleri güvenliği - Presler - Bölüm 2: Mekanik Presler için Güvenlik Gereksinimi |
Başlık (İng) :
|
Machine Tools Safety – Presses – Part 2 : Safety Requirement for Mechanical Presses |
Kapsam :
|
- |
Kapsam (İng) :
|
This document, in addition to ISO 16092-1, specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of the following groups of mechanical presses and mechanical press production systems:
— Group 1: Presses with a part revolution clutch(es);
— Group 2: Presses with a servo drive system (Mechanical servo presses).
NOTE 1 Requirements in this document are essentially applicable to both groups of the mechanical press. If a requirement applies to only one group, then the group is specified.
NOTE 2 Other types of motorized drive systems provide similar functionalities to what is commonly called “servo drives” or "servo motors”, and as such their use is considered the same within the terms used in this document (e.g. variable frequency drive systems).
The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces.
This document deals with all significant hazards relevant to mechanical presses and ancillary devices (e.g. moving die cushions, work-piece ejectors, feeding and transfer systems) which are integral to the machine, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All phases of the machine life cycle as described in ISO 12100:2010, 5.4 have been taken into consideration. |
Yerine Geçen :
|
TS EN ISO 16092-2 :2020; |
Yararlanılan Kaynak :
|
ISO 16092-2:2019 |
Uluslararası Karşılıklar :
|
16092-2-EQV |
ICS Kodu :
|
25.080.01 Takım Tezgahları (Genel) |
Cen/Cenelec :
|
- |
Dili :
|
en |
Renk Durumu :
|
Siyah-Beyaz |
Uygulama Durumu :
|
Yürürlükten kaldırıldı (Withdrawn Standard) |
Sayfa Sayısı :
|
69 |
Fiyatı :
|
100,00 EURO (3.466,97 TL + %10 Kdv) |
Çakışan Standart Varsa İptal Tarihi (DOW) | - |
|